Back to top
   मुझे निःशुल्क कॉल करें एसएमएस भेजें जांच भेजें

मूल्य और मात्रा

  • 1

उत्पाद की विशेषताएं

  • Plastic

व्यापार सूचना

  • दिन

उत्पाद वर्णन

SMPS Board commonly known as Switched-Mode Power Supply unit is an electronic unit that is used to efficiently convert electrical power from alternating form to DC. It is commonly used within electrical appliances such as audio equipment, computers, televisions, and many more. The circuit of this power controller is fabricated by using top-grade electronic components such as capacitors, inductors, and transformers. SMPS Board availed by our company comes with a sturdy mild steel enclosure that gives high rigidity and ingress protection. Get this power control device in various sizes and power ratings as per your demands at a low price.

Applications of Switched-Mode Power Supply Board:

1. Computers and IT Equipment: SMPS boards are used in desktop computers, laptops, servers, and networking equipment to provide stable and efficient power to various components. Their compact size is particularly beneficial in these applications where space is limited.

2. Consumer Electronics: SMPS boards are found in a wide range of consumer electronics such as TVs, DVD players, audio systems, and gaming consoles. These devices require multiple power rails at different voltage levels, which SMPS can efficiently provide.

3. मोबाइल Devices: Smartphones, tablets, and other portable electronic devices use SMPS boards to handle the varying voltage and current requirements of their components. The efficiency of SMPS helps extend battery life.

4. Industrial Equipment: SMPS boards are used in industrial automation, robotics, CNC machines, and various manufacturing equipment. They can efficiently handle the power demands of motors, sensors, controllers, and other components.

5. Telecommunications: Telecom infrastructure like base stations, routers, and modems use SMPS boards to provide stable power to communication equipment. The ability of SMPS to handle varying loads and voltages is particularly useful in these applications.

6. LED Lighting: SMPS boards are used in LED lighting systems to convert AC power to the DC voltage required by LEDs. They enable dimming and efficient power conversion, which is crucial for energy-efficient lighting solutions.

7. Medical Equipment: Many medical devices such as ultrasound machines, MRI scanners, and patient monitors utilize SMPS boards due to their efficiency, compactness, and ability to provide isolated power when necessary.

8. Automotive Electronics: In vehicles, SMPS boards play a role in powering various electronic components such as infotainment systems, navigation devices, and sensors. They help maintain stable power despite fluctuations in the vehicle's electrical system.

9. Renewable Energy Systems: SMPS boards are used in renewable energy systems like solar inverters and wind turbine controllers to efficiently convert the generated power into usable forms for homes and businesses.

10. Aerospace and Defense: Spacecraft, satellites, and military equipment require reliable and efficient power supplies. SMPS boards are employed to ensure stable power delivery in demanding environments.

11. Battery Charging: SMPS-based chargers are commonly used for charging batteries in devices like laptops, smartphones, electric vehicles, and power tools. Their efficiency helps reduce charging times and energy wastage.

12. Data Centers: Large data centers rely on SMPS technology to efficiently distribute power to racks of servers, storage systems, and networking equipment.

Benefits of using Switched-Mode Power Supply Board:

1. Higher Efficiency: One of the primary advantages of SMPS boards is their higher efficiency. Unlike linear power supplies that dissipate excess energy as heat, SMPS boards use switching transistors to control the power flow. This results in significantly less energy wastage, leading to higher overall efficiency levels, which is crucial for energy conservation and reducing operational costs.

2. Compact Size and Light Weight: Switched Mode Power Supply Board boards are much smaller and lighter compared to linear power supplies. This compactness is particularly important in applications where space is limited, such as in portable electronics, automotive systems, and compact industrial equipment.

3. Wider Input Voltage Range: SMPS boards can often accommodate a wider range of input voltages, making them more versatile in various power supply scenarios. This flexibility can be advantageous in applications where the input voltage may fluctuate.

4. Regulation and Stability: SMPS boards provide better voltage regulation and stability under varying load conditions. They can quickly respond to changes in load and input voltage, maintaining a consistent output voltage.

5. Multiple Output Voltages: Many Switched Mode Power Supply Board designs can provide multiple output voltages from a single input source, which is especially useful in devices that require different voltage levels for various components.

6. Isolation: SMPS boards can offer galvanic isolation between input and output, providing safety benefits and protection against voltage spikes or electrical noise, particularly in sensitive applications like medical equipment and industrial automation.

7. Lower Heat Generation: Due to their higher efficiency, SMPS boards generate less heat during operation. This not only prolongs the lifespan of the components but also reduces the need for elaborate cooling systems in certain applications.

8. Better Power Factor Correction (PFC): SMPS boards can incorporate power factor correction circuits to improve the power factor of the load. This helps reduce reactive power consumption and improves the overall efficiency of the power supply.

9. Adaptability to Various Loads: SMPS boards can efficiently handle a wide range of loads, from low to high, without significant loss of efficiency. This adaptability is essential in applications with varying power demands.

10. Reduced Electromagnetic Interference (EMI): The switching nature of SMPS boards can result in reduced EMI compared to linear power supplies. This is important in applications where minimizing electromagnetic interference is critical, such as in radio frequency (RF) equipment and sensitive electronic devices.

11. Design Flexibility: Switched Mode Power Supply Board designs are versatile and can be customized to meet specific voltage and current requirements. This flexibility allows designers to tailor the power supply to the needs of the application.

12. Environmental Impact: Due to their higher efficiency and reduced energy wastage, SMPS boards contribute to a smaller carbon footprint and are more environmentally friendly compared to less efficient power supply solutions.


1. What is a Switched-Mode Power Supply (SMPS) board?

Ans: A Switched-Mode Power Supply (SMPS) board is an electronic circuit that efficiently converts and regulates electrical power from one form to another. It uses high-frequency switching to control the power flow, making it more efficient and compact compared to traditional linear power supplies.

2. How does an SMPS board work?

Ans: An SMPS board works by rapidly switching the input voltage on and off using semiconductor devices like transistors or MOSFETs. This rapid switching allows the SMPS to regulate the output voltage by adjusting the duty cycle of the switching signal. The switched signal is then filtered and smoothed to provide a stable output voltage.

3. What are the advantages of using SMPS boards over linear power supplies?

Ans: Some advantages of using Switched Mode Power Supply Board boards include higher efficiency, smaller size, lighter weight, better voltage regulation, adaptability to various loads, and the ability to provide multiple output voltages. SMPS boards are also more suitable for applications with wide input voltage ranges and where heat dissipation is a concern.

4. What are the different types of SMPS topologies?

Ans: There are several SMPS topologies, including:

a. Buck Converter: Steps down voltage, suitable for lower output voltage applications.
b. Boost Converter: Steps up voltage, useful for higher output voltage applications.
c. Buck-Boost Converter: Can step down or step up voltage.
d. Flyback Converter: Provides galvanic isolation between input and output.
e. Forward Converter: Similar to flyback, optimized for higher power applications.
f. Push-Pull Converter: Used in high-power applications, employs a transformer.

5. What are the main components of an SMPS board?

Ans: Key components include:

a. Switching Transistors/MOSFETs: Control the switching action.
b. Transformers or Inductors: Store energy and provide voltage transformation.
c. Diodes: Control current flow and prevent reverse voltage.
d. Capacitors and Inductors: Smooth and filter the output voltage.
e. Feedback Circuit: Monitors and controls the output voltage.
f. Controller/IC: Manages the switching frequency and duty cycle.

6. What are the common applications of SMPS boards?

Ans: Switched Mode Power Supply Boards are used in computers, consumer electronics, mobile devices, LED lighting, industrial equipment, telecommunications, medical devices, automotive electronics, renewable energy systems, aerospace, data centers, and more.

7. Are there any disadvantages of using SMPS boards?

Ans: While Switched Mode Power Supply Boards offer many advantages, they can introduce higher levels of electromagnetic interference (EMI) due to the rapid switching. Additionally, their design can be more complex than linear power supplies, which may require careful consideration of components and layout to ensure proper functioning.

8. How can I choose the right SMPS topology for my application?

Ans: Choosing the right topology depends on factors like input voltage range, output voltage requirements, load characteristics, and efficiency targets. Consulting with an experienced electronics engineer or using simulation tools can help determine the optimal topology.

9. Can I design my own SMPS board?

Ans: Designing an SMPS board requires a solid understanding of power electronics, circuit design, and layout considerations. It's recommended to have experience in electronics design or work with a qualified engineer to ensure a safe and functional design.

10. What safety precautions should I consider when working with SMPS boards?

Ans: SMPS boards involve high voltages and can be potentially dangerous. Ensure proper grounding, isolation, and follow safety guidelines provided in datasheets and relevant standards. Always disconnect power before making any changes or repairs.
क्रय आवश्यकता विवरण दर्ज करें
ईमेल आईडी
मोबाइल नंबर

फ़ोन :08045804232
Fax :91-22-25397999
Mr Mohan Supe (Partner)
मोबाइल :08045804232